Click image to enlargeDescription:
Actuators
Actuators
More-Details:
• Worm gear operator for 1/4 turn valve. Torque range 2500 to 68000 in-lbs.
• Bevel gear operator for multi-turn gate and globe valve. Torque range 750 to 12000 ft-lbs.
• Pneumatic Rack & Pinion Actuator. Double Acting and Spring Return. Torque range 125 to 11000 in-lbs.
• Bevel gear operator for multi-turn gate and globe valve. Torque range 750 to 12000 ft-lbs.
• Pneumatic Rack & Pinion Actuator. Double Acting and Spring Return. Torque range 125 to 11000 in-lbs.
More Products
Cast Iron (CI & DI) Y-strainers
• Flanged 2” – 16” Class 125LB, 200WOG (Class 250LB onrequest) PN16• Screwed 1/4” – 3”(250S/500WOG)• Grooved end 2” – 16” 250psi• Basket type flanged 2” – 16” Class 125LB, 200WOG• WCB or CF8M on request
Cast Iron Ball Valves, Flanged Ends, Face to Face to ANSI B16.10 Class 125LB 200WOG
• Short pattern 2” – 12” equal to Gate Valve F-F• Full port, Lever or gear operator• 304 SS trim
Cast Iron Double Regulating Valves (Balancing Valves) PN16／ANSI 125LB 200WOG
• Flanged 2 1/2” – 12” or Grooved 2” – 12”• Y pattern stop valve• Provides the functions of shut-off, thrusting, and check valve in one
Cast Iron Gate Valves, Screwed Ends for Irrigation Use
• RS & NRS, bolt bonnet 2” – 8” 125WSP, 200WOG MSS SP-70• RS, clamp bonnet 1/2” – 2”, 150WSP 225WOG; 21/2” – 4”, 125WSP 175WOG• Threads to ANSI B1.20.1
Cast Iron Globe Check Valves, Class 125, 2”-12” 200PSI, Bronze Disc
• For installation in pump suction or discharge piping, Spring automatically closes disc at zero flow before flow reversal occurs and prevents surge and water hammer• Completely guided disc – both top and bottom• Equally effective installed horizontally or vertically• Class 150 CS & SS available
Cast Iron or Ductile Iron Gate Valves; AWWA Flanged, Mechanical Joint, Grooved and Push on Ends, Resilient Wedge and Metal-to-Metal Seated. 200 or 250WOG
• NRS 2”– 24”; OS&Y 2”– 24”; MJ 3”– 16”; PO 2”– 12”• Fire protection service• AWWA C509, C515 compliance
Cast Iron Silent Check Valves, Class 125, 1 1／2”-12” 150PSI
• These valves are designed for liquid service and offer many obvious advantages when compared with conventional swing check valves. The spring automatically closes the disc at zero flow, before flow reversal, preventing surge and water hammer.• The disc is fully guided at the top and bottom to prevent binding and cooking.• Equally effective for vertical or horizontal flowl Class 150 CS & SS available
Cast Stainless Steel OS&Y Gate, OS&Y Globe, Swing Check valves,Class 150LB, CF8M, API 603
• Flanged ends 2” – 12” bolted bonnet• Threaded ends 1/2” – 2” screw-in bonnet
