Click image to enlargeDescription:
Cast Iron or Ductile Iron Gate Valves; AWWA Flanged, Mechanical Joint, Grooved and Push on Ends, Resilient Wedge and Metal-to-Metal Seated. 200 or 250WOG
Cast Iron or Ductile Iron Gate Valves; AWWA Flanged, Mechanical Joint, Grooved and Push on Ends, Resilient Wedge and Metal-to-Metal Seated. 200 or 250WOG
More-Details:
• NRS 2”– 24”; OS&Y 2”– 24”; MJ 3”– 16”; PO 2”– 12”
• Fire protection service
• AWWA C509, C515 compliance
• Fire protection service
• AWWA C509, C515 compliance
More Products
Cast Iron Globe Check Valves, Class 125, 2”-12” 200PSI, Bronze Disc
• For installation in pump suction or discharge piping, Spring automatically closes disc at zero flow before flow reversal occurs and prevents surge and water hammer• Completely guided disc – both top and bottom• Equally effective installed horizontally or vertically• Class 150 CS & SS available
Cast Iron Gate Valves, Screwed Ends for Irrigation Use
• RS & NRS, bolt bonnet 2” – 8” 125WSP, 200WOG MSS SP-70• RS, clamp bonnet 1/2” – 2”, 150WSP 225WOG; 21/2” – 4”, 125WSP 175WOG• Threads to ANSI B1.20.1
Cast Iron Double Regulating Valves (Balancing Valves) PN16／ANSI 125LB 200WOG
• Flanged 2 1/2” – 12” or Grooved 2” – 12”• Y pattern stop valve• Provides the functions of shut-off, thrusting, and check valve in one
Cast Iron Ball Valves, Flanged Ends, Face to Face to ANSI B16.10 Class 125LB 200WOG
• Short pattern 2” – 12” equal to Gate Valve F-F• Full port, Lever or gear operator• 304 SS trim
Cast Iron (CI & DI) Y-strainers
• Flanged 2” – 16” Class 125LB, 200WOG (Class 250LB onrequest) PN16• Screwed 1/4” – 3”(250S/500WOG)• Grooved end 2” – 16” 250psi• Basket type flanged 2” – 16” Class 125LB, 200WOG• WCB or CF8M on request
Actuators
• Worm gear operator for 1/4 turn valve. Torque range 2500 to 68000 in-lbs.• Bevel gear operator for multi-turn gate and globe valve. Torque range 750 to 12000 ft-lbs.• Pneumatic Rack & Pinion Actuator. Double Acting and Spring Return. Torque range 125 to 11000 in-lbs.
Knife Gate Valves, OS & Y Wafer and Lugged, 3” 12” (14” 24” on Request)
• Bi-directional position shut off at min. line pressure• Knife edge gate for cutting through media• Meet MSS SP81 for 150psi CWP TIS 405-8• Body material- 316SS(CF8M), 317SS(CG3M), Ductile Iron /316SS lining• Metal seat or resilient seat• Flange dimension ASME B16.5• Locking device available
Investment Cast Stainless Steel Threaded Ends Valves, Class 200LB, CF8M
• Gate, NRS 1/2” – 2”(2 1/2” & 3” on request)• Gate, RS 1/2 – 2”• Globe 1/2” – 2”; Metal or Teflon seat• Swing check, straight & Y-pattern 1/2” – 2”; Metal or Teflon seat
