Click image to enlargeDescription:
CI or DI Dual Checks (Double Door) Wafer Type or Twin Disc
CI or DI Dual Checks (Double Door) Wafer Type or Twin Disc
More-Details:
• Size 1 1/2”- 24”; SS or Al.Bronze disc
• PN16 1 1/2”-12”; PN10 14”-32”
• EPDM, Buna-N, Viton Seat
• Temperature: 15℃-150℃
• Design to API594, ISO5752, ISO3202, DIN2501, ANSI B16.1, B16.5, BS 4504
• Class 150/300 CS & SS available
• PN16 1 1/2”-12”; PN10 14”-32”
• EPDM, Buna-N, Viton Seat
• Temperature: 15℃-150℃
• Design to API594, ISO5752, ISO3202, DIN2501, ANSI B16.1, B16.5, BS 4504
• Class 150/300 CS & SS available
More Products
CI or DI Butterfly Valves 200WOG&250 WOG or PN10, PN16&PN25
• Wafer type 2” – 48”• Lugged type 2” – 48”• U-section 30”, 36”, 42”, 48”, 54” & 60”• Grooved end 2” – 12”• EPDM, Buna-N, Viton Seat• For Dead End service, need to be special made.• Actuation- Worm Gear, Pneumatic & electrical• Meet Flange spec. of BS EN, ANSI or JIS
Cast Steel Y-strainers, Threaded Class 600LB／1500WOG, Flanged 150LB
• Socket weld ends 1/4” – 2” also available• Stainless steel perforated or with 20 to 100 mesh wire screen• Bronze, WCB & CF8M are all available.
Cast Stainless Steel OS&Y Gate, OS&Y Globe, Swing Check valves,Class 150LB, CF8M, API 603
• Flanged ends 2” – 12” bolted bonnet• Threaded ends 1/2” – 2” screw-in bonnet
Cast Iron Silent Check Valves, Class 125, 1 1／2”-12” 150PSI
• These valves are designed for liquid service and offer many obvious advantages when compared with conventional swing check valves. The spring automatically closes the disc at zero flow, before flow reversal, preventing surge and water hammer.• The disc is fully guided at the top and bottom to prevent binding and cooking.• Equally effective for vertical or horizontal flowl Class 150 CS & SS available
Cast Iron or Ductile Iron Gate Valves; AWWA Flanged, Mechanical Joint, Grooved and Push on Ends, Resilient Wedge and Metal-to-Metal Seated. 200 or 250WOG
• NRS 2”– 24”; OS&Y 2”– 24”; MJ 3”– 16”; PO 2”– 12”• Fire protection service• AWWA C509, C515 compliance
Cast Iron Globe Check Valves, Class 125, 2”-12” 200PSI, Bronze Disc
• For installation in pump suction or discharge piping, Spring automatically closes disc at zero flow before flow reversal occurs and prevents surge and water hammer• Completely guided disc – both top and bottom• Equally effective installed horizontally or vertically• Class 150 CS & SS available
Cast Iron Gate Valves, Screwed Ends for Irrigation Use
• RS & NRS, bolt bonnet 2” – 8” 125WSP, 200WOG MSS SP-70• RS, clamp bonnet 1/2” – 2”, 150WSP 225WOG; 21/2” – 4”, 125WSP 175WOG• Threads to ANSI B1.20.1
Cast Iron Double Regulating Valves (Balancing Valves) PN16／ANSI 125LB 200WOG
• Flanged 2 1/2” – 12” or Grooved 2” – 12”• Y pattern stop valve• Provides the functions of shut-off, thrusting, and check valve in one
