Click image to enlargeDescription:
Flow Measurement Device
Flow Measurement Device
More-Details:
• Flow measurement devices are suitable for use with PN10, PN16, PN25 or PN40 flanged valves having ratings detailed in the appropriate limited to 180℃ max
• A stainless steel orifice plate having integral orifice with true square upstream edge
• Can be used as a single unit or close coupled to other regulating or isolating valves to provide accurate flow measurement
• A stainless steel orifice plate having integral orifice with true square upstream edge
• Can be used as a single unit or close coupled to other regulating or isolating valves to provide accurate flow measurement
More Products
Ductile Iron Water Works Gate Valves PN16, BS／SABS／DIN, RS & NRS
• DN65-DN600• Spec. to BS 5163 Flanged• Spec. to DIN 3202 Flanged• Spec. to SABA 664 Flanged or Push on Join
CI or DI Swing Check Valves; Flanged, Grooved and Wafe
• Flanged 2”– 24”; Screwed 2”– 8”• Wafer 2”– 12”; Grooved 2”– 12” • Bronze seat; Resilient seat• C1.125S/200WOG, 250S/500WOG• UL/FM approval is available 21/2”– 12” flanged• With Lever and weight or spring loaded on request
CI or DI Dual Checks (Double Door) Wafer Type or Twin Disc
• Size 1 1/2”- 24”; SS or Al.Bronze disc• PN16 1 1/2”-12”; PN10 14”-32”• EPDM, Buna-N, Viton Seat• Temperature: 15℃-150℃• Design to API594, ISO5752, ISO3202, DIN2501, ANSI B16.1, B16.5, BS 4504• Class 150/300 CS & SS available
CI or DI Butterfly Valves 200WOG&250 WOG or PN10, PN16&PN25
• Wafer type 2” – 48”• Lugged type 2” – 48”• U-section 30”, 36”, 42”, 48”, 54” & 60”• Grooved end 2” – 12”• EPDM, Buna-N, Viton Seat• For Dead End service, need to be special made.• Actuation- Worm Gear, Pneumatic & electrical• Meet Flange spec. of BS EN, ANSI or JIS
Cast Steel Y-strainers, Threaded Class 600LB／1500WOG, Flanged 150LB
• Socket weld ends 1/4” – 2” also available• Stainless steel perforated or with 20 to 100 mesh wire screen• Bronze, WCB & CF8M are all available.
Cast Stainless Steel OS&Y Gate, OS&Y Globe, Swing Check valves,Class 150LB, CF8M, API 603
• Flanged ends 2” – 12” bolted bonnet• Threaded ends 1/2” – 2” screw-in bonnet
Cast Iron Silent Check Valves, Class 125, 1 1／2”-12” 150PSI
• These valves are designed for liquid service and offer many obvious advantages when compared with conventional swing check valves. The spring automatically closes the disc at zero flow, before flow reversal, preventing surge and water hammer.• The disc is fully guided at the top and bottom to prevent binding and cooking.• Equally effective for vertical or horizontal flowl Class 150 CS & SS available
Cast Iron or Ductile Iron Gate Valves; AWWA Flanged, Mechanical Joint, Grooved and Push on Ends, Resilient Wedge and Metal-to-Metal Seated. 200 or 250WOG
• NRS 2”– 24”; OS&Y 2”– 24”; MJ 3”– 16”; PO 2”– 12”• Fire protection service• AWWA C509, C515 compliance
